Portable jaw crusher is new generation of mobile crushing station equipped with intelligent control system. It makes all components completely airborne, so there is no need to install machine and pour foundation. It can be put into use as soon as it arrives at the production site, which is very flexible.
River pebble, rock (limestone, granite, basalt, diabase, andesite, etc.), ore tailings
Metal and non-metallic mines, cement, aggregate, metallurgy, construction waste
Jaw crusher is mainly composed of a fixed jaw plate, movable jaw plate, frame, upper and lower guard plates, adjusting the seat, movable jaw rod, and so on. The ore materials to be crushed enter the crushing chamber from the upper feed inlet, and the movable jaw plate periodically reciprocates the fixed jaw plate around the eccentric shaft, and sometimes approaches and leaves. Just when the movable jaw plate approaches the fixed jaw plate, The ore between the two jaws is crushed by the combined action of crushing, splitting, and bending; when the movable jaw leaves the fixed jaw, the crushed ore passes through the discharge port of the crusher under the action of gravity. exclude.
Features & Advantages
1. High-quality Casting Ensures Reliable Performances
Fixed jaw die configuration in a wrap-around design for frame protection
Recommended for big lumps & large quantities, for primary crushing of limestone, river stone, tough ores, and concrete recycling.
3. Top quality roller bearings provide strength & safety.
Oil bath lubrication ensures longer service life.
4. High crushing ratio
Large & deep crushing chamber with sharp crushing angle, to achieve a very high crushing ratio. And bigger feed opening and longer pitman arm is especially suitable for primary crushing.
|Jaw portable crusher||PP600||PP750||PP900||PP1060||PP1200||PP1300|
|Shipping Size||length (mm)||8600||9600||11097||13300||15800||9460|
|Axle load (kg)||10121||14500||21380||38430||64000||14730|
|Tractor weight (kg)||5119||7500||10890||19450||34000||10490|
|Material inlet (mm)||400×600||500×750||600×900||750×1060||900×1200||300×1300|
|Adjusting rangeof charging hole (mm)||40-100||50-100||65-180||80-180||95-225||20-90|